It is important to apply standalone smoke detectors in new and existing residential buildings. They can remind people to evacuate quickly, which can effectively reduce casualties and property losses. Therefore, having a standalone smoke detector is very critical for people’s safety.
The standalone smoke detector has mature technology and low cost, and can be installed and maintained conveniently. It is an effective device for preventing and responding to fires in various residential places.
Select the standard products strictly. The standalone smoke detector is directly related to life safety, so its specifications must meet the relevant standards in order to reach optimal performance, ensuring people's lives and safety.
Ensure technical performance. In order to make sure reliability, you should choose the optoelectronic standalone smoke detector, and install a combustible gas detector in the kitchen. The standalone smoke detector should be installed near the center of the room ceiling, away from the corners and other places with poor air convection.
For places for disabled people, it is suggestible to install a vibrating reminder next to the bed, and a strobe light or a voice alarm at the door of the bedroom. When there is more than one standalone smoke detector in the house, after one of the detectors is activated, the other detectors should also sound at the same time. In areas where the standalone smoke detectors are relatively concentrated, you should choose the network-type standalone smoke detectors that can simultaneously send fire messages to the auxiliary equipment such as remote displays.
The installation position of the standalone smoke detector should be in the public area of the building, such as the ceiling of the evacuation stairs on each floor. And it should also be installed in the bedroom and other resting rooms, living rooms, dining rooms, etc. of residential buildings.
Do the proper maintenance. When the standalone smoke detector is powered by batteries, the batteries should be selected according to the product instructions and replaced regularly. The users should check the standalone smoke detector’s function and test it according to the instruction in a regular basis, solving problems such as surface contamination, displacement, interruption of power supply, etc.
For the standalone smoke detectors that often cause false alarms, you should find out the reasons and fix them in time, so as to improve the performance of the smoke detectors, making sure that they can work effectively.
A fire hose is a highly pressurized hose that is used to bring water to the fire. It may also transport flame retardants. Fire hoses can be attached to either a fire engine or a fire hydrant, and the pressure is between 800 and 2000 kPa. For reasons of fire safety, it's quite important to have a fire hose inspection as well as all fire protection equipment tested. If, during a fire emergency, the fire hose fails it could have disastrous results.
Waterproof Heat Detector
Fixed Temperature Waterproof Heat Detector, the detector uses a bi-metallic strip to sense temperature change, therefore consuming minimal standby current and providing high reliability.
The Detector is particularly suited to environments, which are exposed to high levels of condensation or are hosed down. The detector has a wide operating margin allowing it to respond to both slow and fast increases in temperature; it can also sense temperature reliably in a horizontal or vertical position.
The Explosion Proof range of products has been designed to provide protection against explosions and products to ensure that all major advantages of high-quality fire detection technology can be safely exploited in industrial and hazardous environments. Many difficult sites such as metal, paint, pipelines, chemical, pharmaceutical, oil refineries, and other installations are vulnerable to the risk of explosion. In order to protect the assets and people, they need special solutions for fast and reliable fire detection.
Emergency lighting system is divided into centralized controlling and non-centralized controlling type, or centralized power supply and non-centralized power supply type. This article talks about emergency lighting system, power supply, emergency light controller installation guide.
China-R&D and Supply Chain Center
Huoju District, Zhongshan City, Guangdong Province, China